EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Cost Controller can be a hugely effective photo voltaic controller designed for off-grid photo voltaic devices. Based upon multiphase synchronous rectification know-how, it guarantees optimized Power conversion and procedure balance for a variety of photovoltaic (PV) programs.
Vital Characteristics of the EPEVER Tracer AN Sequence Controller
The Tracer AN collection utilizes EPEVER Solar Cost Controller know-how for top-quality photo voltaic energy harvesting. Crucial characteristics involve:
Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Highly developed MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for enhanced battery existence.
LCD Display with actual-time info monitoring.
Several Load Command Modes like handbook and timer.
Comprehensive Electronic Protections towards overcharging, about-discharging, short circuits, and reverse polarity.
Stage-by-Step Tutorial to Creating the EPEVER Tracer AN Collection Controller
1. Unboxing and Preparing the Controller
Guarantee all parts are bundled: Tracer AN device, temperature sensor, interaction cables, and person manual.
Verify the model selection and voltage scores match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Pick a properly-ventilated, dry locale near to the battery financial institution.
Safe the Tracer AN controller using the supplied mounting brackets.
Manage correct clearance for warmth dissipation.
3. Wiring the Photo voltaic Charge Controller
Warning: Always comply with suitable safety protocols and ensure the technique is run off in advance of connecting factors.
Step 1: Connect the battery terminals for the cost controller (positive to optimistic, adverse to unfavorable).
Step 2: Join the photo voltaic panel array on the PV input terminals.
Step three: Join the load terminals if employing a direct load link.
Action four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Options
Electrical power on the controller by connecting the battery to start with.
Make use of the LCD Display screen to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, mild Command.
5. Monitoring and Information Logging
The Tracer AN Series supports serious-time monitoring using the MT50 distant meter.
Info is usually logged by means of the RS485 communication port applying software package including Photo voltaic Station Personal computer.
Remote checking is achievable Using the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Situation one: No Electricity Output
Check battery voltage and Read more connections.
Confirm PV panel voltage exceeds battery voltage.
Challenge 2: Above-Voltage Protection
Confirm the photo voltaic array’s voltage score.
Regulate technique parameters if necessary.
Situation 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Great things about the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Increased Performance: Lowered Electrical power losses in the course of conversion.
Increased Reliability: Steady performance beneath variable hundreds.
Extended Battery Lifestyle: Dependable and accurate charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification engineering is undoubtedly an Remarkable choice for optimizing solar power technology and extending battery existence. By next the above setup tutorial, users can make certain utmost efficiency and program longevity.