EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller can be a really effective solar controller suitable for off-grid solar units. Based on multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and system stability for a wide range of photovoltaic (PV) applications.
Important Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Charge Controller engineering for excellent photo voltaic Electricity harvesting. Vital options involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Dual-Phase Charging for Increased battery lifetime.
Liquid crystal display Screen with true-time knowledge monitoring.
Several Load Handle Modes which includes manual and timer.
Complete Electronic Protections versus overcharging, around-discharging, small circuits, and reverse polarity.
Action-by-Action Manual to Establishing the EPEVER Tracer AN Series Controller
one. Unboxing and Making ready the Controller
Assure all parts are incorporated: Tracer AN device, temperature sensor, interaction cables, and consumer handbook.
Validate the product range and voltage rankings match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Select a well-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller utilizing the delivered mounting brackets.
Retain correct clearance for warmth dissipation.
three. Wiring the Solar Demand Controller
Warning: Often adhere to proper protection protocols and ensure the method is run off in advance of connecting parts.
Stage one: Hook up the battery terminals for the charge controller (favourable to constructive, damaging to negative).
Move two: Connect the photo voltaic panel array for the PV input terminals.
Action three: Link the load terminals if using a immediate load connection.
Step four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Configurations
Power about the controller by connecting the battery very first.
Make use of the LCD Display screen to navigate the options menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild control.
five. Monitoring and Knowledge Logging
The Tracer AN Series supports serious-time monitoring utilizing the MT50 distant meter.
Information is usually logged through the RS485 communication port working with application such as Photo voltaic Station Computer.
Distant monitoring can be done With all the EPEVER WiFi module.
six. Troubleshooting Frequent Issues
Challenge 1: No Electric power Output
Examine battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem 2: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Adjust technique parameters if required.
Problem 3: No Battery Charging
Inspect PV wiring for Click Here continuity.
Affirm MPPT settings while in the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Better Efficiency: Diminished Power losses through conversion.
Enhanced Reliability: Stable effectiveness under variable masses.
For a longer period Battery Existence: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification engineering can be an Outstanding option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up guide, end users can be certain optimum effectiveness and procedure longevity.