EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Cost Controller is usually a remarkably effective photo voltaic controller designed for off-grid photo voltaic devices. Determined by multiphase synchronous rectification know-how, it assures optimized Electricity conversion and program stability for a wide array of photovoltaic (PV) applications.
Crucial Capabilities of your EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Cost Controller technological know-how for top-quality photo voltaic energy harvesting. Important attributes consist of:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for Increased battery daily life.
LCD Show with actual-time info monitoring.
Numerous Load Manage Modes such as manual and timer.
Comprehensive Digital Protections versus overcharging, about-discharging, small circuits, and reverse polarity.
Action-by-Phase Information to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Be certain all factors are involved: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product range and voltage rankings match your solar panel and battery specs.
2. Mounting the Demand Controller
Pick out a properly-ventilated, dry area close to the battery lender.
Protected the Tracer AN controller using the delivered mounting brackets.
Keep right clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Caution: Often adhere to good basic safety protocols and ensure the system is powered off right before connecting parts.
Phase 1: Join the battery terminals into the cost controller (optimistic to positive, destructive to adverse).
Phase 2: Join the photo voltaic panel array towards the PV enter terminals.
Action 3: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
4. Configuring the Controller Settings
Ability over the controller by connecting the battery 1st.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, gentle Manage.
five. Checking and Knowledge Logging
The Tracer AN Series supports real-time monitoring using the MT50 remote meter.
Facts could be logged via the RS485 conversation port utilizing software for example Solar Station Computer system.
Remote monitoring is achievable with the EPEVER WiFi module.
six. Troubleshooting Common Difficulties
Problem one: No Energy Output
Look at battery voltage and connections.
Verify PV Click Here panel voltage exceeds battery voltage.
Challenge 2: About-Voltage Protection
Validate the solar array’s voltage score.
Adjust technique parameters if needed.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT options during the menu.
Advantages of the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technological know-how guarantees:
Bigger Efficiency: Minimized Power losses for the duration of conversion.
Increased Dependability: Secure overall performance underneath variable loads.
For a longer time Battery Everyday living: Constant and precise charging profiles.
Summary
The EPEVER Solar Demand Controller with multiphase synchronous rectification technology is undoubtedly an Remarkable choice for optimizing solar energy technology and extending battery existence. By following the above mentioned set up manual, end users can be certain optimum efficiency and process longevity.